RM200B-17W2S-1 : Combination D-Sub
Combo D-Sub 17W2S Connector
DisclaimerWhile the information presented within our website is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester Electronics Corporation disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Please contact us at 203-741-5400 for specific information on the latest design options and specifications.
SDRM200B-17W2S-1 1 C.pdf:
Ganged RF for High Frequency
A customer approached Winchester with an application requiring three sets of three RF edge launch printed circuit board connectors, mating horizontally to the board with cabled connectors in the space of 0.875” x 0.375”. The application had to meet several requirements, including 1) a compact footprint for each connector, 2) ruggedized due to extreme operating conditions, 3) easily serviceable in the field, and 4) perform up to 20 GHz with 40 dB of RF isolation between each RF line. Further, a heavily tooled, highly custom design was undesirable due to lead time and the relatively low volume of the program.
High Power RF Cables and Connectors
An aerospace customer approached Winchester’s TRU division with a challenge related to RF transmission lines it was using on a military surveillance aircraft radar system. The application met specifications established by the Electronic Industrial Alliance (“EIA”) and utilized EIA flange connectors to connect high power coaxial transmission lines with feedline diameters up to several inches. Although the current solution was functional, it was difficult to use, heavy, and inflexible. In addition, the existing solution had a limited number of possible configurations and was prone to foreign object debris (“FOD”).
Talk to our experts
Connecting customers with the right products and technical experts