Winchester Electronics

MRAC34P : MRAC Series

MRAC Plug - 34 Pin Contact

Our Rack and Panel product line is one of the most comprehensive pin and socket style connector systems available for cable-to-cable, cable-to-panel, and cable-to-board applications. The extreme versatility of Winchester’s Rack and Panel line allows this connector system to be used in a wide variety of industries including industrial, military, aerospace, instrumentation, and telecommunications.
Read More >
Need Help? Talk to our Experts
We recommend that you confirm the precise technical information presented on the website with an engineer before designing into your application. Read disclaimer.
Disclaimer
While the information presented within our website is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester Electronics Corporation disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Please contact us at 203-741-5400 for specific information on the latest design options and specifications.
Specifications Case studies
Specifications
Military Part Number
-
NSN Part Number
-
Body Plating
-
Cable Part Number
-
Cable Procedure
-
Cable Type
-
Center Contact Plating
-
Connector Only
-
Crimp Die
-
Crimp Tool
-
Gender
-
Military Part Category
-
Non Magnetic
-
OD
-
Orientation
Straight
Plating
-
QPL/Non QPL
Non-QPL
Reference Standard
-
Termination Type
-
Type
Plug
  • Medical Cable Assemblies

    Quick Disconnect Fiber Contact – Hybrid Cable Assembly

    A leader in operating and emergency room equipment partnered with Winchester to address issues with its operating room audio-visual system. The system is a critical operating room tool that the surgeon and entire operating room team rely on. Issues with this system can distract from the primary objective of focusing on the patient. Intermittent signal, damaged connectors (in installation and use), and ease of connect/disconnect were the issues that needed to be addressed. The customer approached Winchester Electronics to help develop an interconnect solution that guaranteed signal integrity, eliminated the threat of damaged connectors, and simplified the connect/disconnect process.

    Download Case Study
  • Triple Shielded Cable Solution

    A customer approached Winchester Electronics’ SRC Haverhill (SRCH) division looking to improve the performance of its RF cables. The cables were used in automated test equipment where electromagnetic interference (“EMI”) was high. In addition, its assembly technicians complained that routing standard, double- shielded RF cable through its test system was difficult and would lead to delays in production.

    Download Case Study
  • Low Insertion Loss Semi-rigid SMP Cable Assembly

    Winchester’s SRC Haverhill division was asked to evaluate cable assemblies that failed to consistently meet the customer’s expected performance levels. The customer manufactured the assemblies in-house using purchased MIL Spec SMP Right-Angle solder type cable connectors with a standard bifurcated center contact. The customer selected 0.047 semi-rigid cable with 69.5 VoP solid PTFE dielectric. Coupling the connector and cable with the quality assembly work from experienced operators, the customer should have been able to meet the required performance criteria. However, despite its best efforts the customer could not reliably pass a 0.70 dB Insertion Loss and 1.35:1 VSWR @ 20 GHz requirement. This inconsistency was causing critical disruptions in manufacturing.

    Download Case Study
Need Help?
Need Help? Talk to our experts

Need Help?

Talk to our experts

Connecting customers with the right products and technical experts

Technical Experts Sales Experts Business Experts