7/8 EIA Series
EIA interfaces are flanged High Power connectors.
EIA stands for “Electronic Industries Alliance” which is a standards body that defines the interface configuration. Typically these are only required in very high power transmitting installations (10s of kW to MW) where the feedline diameters may be several inches.
One side of the connection is denoted as a male connection, or bullet, while the other side is denoted as the female connection, or cup. The mounting flange design, inner and outer conductor dimensions are standardized by the EIA. They are commonly referred to by the outer diameter of the outer conductor in fractional inches. Sizes covered under these two standards range from 3/8 to 6 1/8 inch outside diameter (OD) for 50 ohm designs. Common flange sizes include 1-5/8 (3 GHz max frequency) and 7/8 (6 GHz max frequency). EIA flange designs are commonly used in military applications connecting high power antennas for ground or airborne radar as well as commercial applications in industrial equipment, broadcast and telecom infrastructure.
DisclaimerWhile the information presented within our website is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester Electronics Corporation disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Please contact us at 203-741-5400 for specific information on the latest design options and specifications.
Products (Showing 1 - 9 of 9 )
Talk to our experts
Connecting customers with the right products and technical experts