Filter By Expertise

All
  • Cables:
  • Cable Assy & Fiber:
  • Connectors:
  • Hermetics:
  • More products:
  • Alan Walse

    Director of Engineering - CNC

    • Ruggedized Cable
    • Trainline Junction Boxes

    Alan Walse

    Director of Engineering - CNC

    Alan has been with Winchester since 2012 and has over 40 years of industry experience. He previously held roles as Design Engineer for Pyle National, Director of Strategic Product Development for Molex, and General Manager of Clements National. He specializes in HazLoc, Power, Control, Instrumentation, Crimp/BtoB, and electrical connectors used in Heavy Duty Industrial applications. Alan is also amongst our top patents holders with 17 to his name.

  • Bud Bowen

    Principal Engineer, Engineered Cables Division

    • Complex Wire Harness
    • Heavy Gauge Power Cables and Cords
    • Multi-Conductor
    • Overmold Cable Assemblies

    Bud Bowen

    Principal Engineer, Engineered Cables Division

    Bud has been with Winchester since 2004 and has 35 years of industry experience. He holds degrees in both Mechanical and Industrial Engineering, and specializes in Cable & Wire Harness Design and Assembly. His professional affiliations include IPC620 Committee Vice Chairman, WHMA – Vice Chairman, and he is a Six Sigma Green Belt and Lean Manufacturing Expert. He has received numerous awards, including IPC/WHMA-A-620 Rev B ( Distinguished Committee Service 2013), 731 K Task Group and IPC-D-620 Rev A ( Distinguished Committee Service 2015) WHMA (Distinguished Committee Service IPC/WHMA-A-620 2012). He gives back to his community by being a volunteer for Convoy of Hope and Foster Families Support, and a youth football and baseball coach. As a fun fact, Bud loves drag racing his Mustang GT.

  • CL Fong

    Engineering Manager - Malaysia

    • Complex Wire Harness
    • Heavy Gauge Power Cables and Cords
    • Multi-Conductor
    • Overmold Cable Assemblies

    CL Fong

    Engineering Manager - Malaysia

    Fong has been with Winchester since 2006 and has 15 years of experience in the industry. Prior to joining WInchester, he held the role of Manufacturing Engineer at Varitronix. Fong specializes in Cable & Wire Harness Design and Assembly, Semi-Rigid Coax Cable Assembly, and RF Cable Assembly. He received his Bachelors in Electronic and Electrical Engineering from University of Northumbria and is a certified Six Sigma Green Belt, LEAN Manufacturing. Fong gives back to his community by volunteering with Charis Hospice Hunt, and loves to play badminton.

  • Dan Hirschnitz

    General Manager - SRC Haverhill

    • Multi-Conductor
    • RF Cable Assemblies
    • Microwave Absorber Material

    Dan Hirschnitz

    General Manager - SRC Haverhill

    Dan has been with Winchester since 2013 and has 25 years of industry experience. He specializes in Semi-rigid coax cable assemblies, flexible coax cable assemblies, Microwave Absorber Material (PolyIron), and Vortex 83% VP ultra low loss cable assemblies. He gives back to his community by being a youth soccer, basketball, and football coach. A fun fact about Dan is that he is part owner of a small craft brewery in Santa Rosa, CA called Cooperage Brewing Company.

  • Dave Camelio

    Design Engineer - WKC

    • RF & Microwave

    Dave Camelio

    Design Engineer - WKC

    Dave has been with Winchester since 2005 and has 37 years of industry experience. He has a Bachelor of Science in Electrical Engineering Technology from Northeastern University and has previously held engineering roles at M/A-COM. He specializes in RF Coaxial Connector and Cable Assembly Design and is a member of IEEE and DLA RF Connector Groups. He holds four patents and is passionate about creating designs to solve customer challenges.

  • Dennis Carlson

    Director of Sales & Marketing - Ruggedized Industrial Division

    • Trainline Junction Boxes
    • Ruggedized Cable
    • Ruggedized Overmold Cable
    • Ruggedized Multi-Conductor Connectors
    • Sensors

    Dennis Carlson

    Director of Sales & Marketing - Ruggedized Industrial Division

    Dennis has been with Winchester since 2012 and has 35 years of industry experience. He previously held multiple positions at Amphenol, Pyle National, FCI, and Clements National before joining Winchester. Dennis is specialized in electrical circular connectors and cable assemblies, ethernet connectors and cable assemblies, and junction box assemblies for ruggedized applications in Rail Mass Transit and Marine Oil & Gas markets. He is a member of the American Public Transportation Association, Railway Supply Institute, and the Midwest High Speed Association. Dennis is also the author of Case Studies titled Custom Engineered Junction Boxes and VN-PC Ethernet for Next Generation Passenger Rail Cars. He gives back to his community by volunteering at church functions and fundraisers and, as a fun fact, he played football in both college and high school, a feat for which he is now “feeling the pain.”

  • Douglas McCarron

    General Manager - Tekna Seal

    • Glass Hermetic Sealing

    Douglas McCarron

    General Manager - Tekna Seal

    Doug joined Winchester in 2016, having been with Winchester acquisition, Tekna Seal, since 1993. He received his Bachelor of Science degree in Industrial Engineering from the University of Wisconsin-Stout and is co-inventor on U.S. Patent No’s 5726854 and 5768083. Doug is an experienced outdoorsman – once during a single two-week period he was able to both trek the Amazon basin in Ecuador, and camp in a snow cave in northern Minnesota.

    Doug McCarron
  • Ed Taylor

    General Manager - SRI Hermetics

    • Custom Seals
    • Multi-Pin
    • RF & Microwave
    • Vacuum Products

    Ed Taylor

    General Manager - SRI Hermetics

    Ed joined Winchester Electronics in 2015 when SRI Hermetics was acquired. He has 29 years of industry experience and previously held roles of Microwave Module Assembly at Texas Instruments, VP Engineering at Pacific Aerospace & Electronics, and Founder of SRI Hermetics. Ed specializes in hermetic connector design and higher level assembly integration. He is an award-winning innovator who holds over 25 US Patents. Ed enjoys spending quiet time with his wife, but also wishes he still owned a motocross bike.

  • Jerome Farnan

    General Manager - Advanced Optical Fiber

    • Fiber Optic
    • Fiber Optic Cable Assembly
    • Fiber Components

    Jerome Farnan

    General Manager - Advanced Optical Fiber

    Jerome has been with Winchester since 2006 and has 26 years of experience in the industry. He earned his Bachelor of Science in Electrical Engineering from Curtin University and his MBA from Deakin University. Jerome previously held positions as Electronics Engineer – Advanced Optical Fiber Research; Manufacturing Engineering and Automation, and Manager of Micro Optics Group – ADC Telecommunications; and Director of Engineering – Advanced Interconnect. He holds two patents and is the author of the white paper Improving Reliability of Optical System with Expanded Beam Connectors – presented at SMPTE and NEFC. He has given back to his community by being a youth basketball and flag football coach and, as a fun fact, he once did the 24-hour Lemons Race.

  • Joe George

    SRI Hermetics Global Sales

    • Custom Seals
    • Multi-Pin
    • Vacuum Products

    Joe George

    SRI Hermetics Global Sales

    Joe joined Winchester Electronics in 2014 and has 10 years of experience in the industry. His prior roles have included Manufacturing Engineer, Finance Manager, and Manufacturing Manager. He is our Global Hermetics expert who is passionate about providing solutions to meet high reliability hermetic requirements.

  • John Benham

    WKC Engineering Director

    • Multi-Pin
    • RF & Microwave

    John Benham

    WKC Engineering Director

    John has been with Winchester since 1999, and has over 35 years of experience in the industry. He specializes in RF Connector, RF Cable, and PCB design and is a member of SMPTE. John holds 23 Patents and is the author of several white papers: Maximizing 10 Gbps Transmission lath in Copper backplanes with and without transceiver technology – DesignCon 2003; Modeling Long Complex Channels for 10 Gbps NRZ Serial Signaling – Ansoft 2003; and Crosstalk in 10 Gbps Serial Channels: Optimizing the Forgotten Component – DesignCon 2004.

  • Larry Lao

    Engineering Manager - China

    • Complex Wire Harness
    • Multi-Conductor
    • Overmold Cable Assemblies
    • RF & Microwave

    Larry Lao

    Engineering Manager - China

    Larry has been with Winchester Electronics since 2005 and has 16 years of experience in the industry. He has an MBA from University of North Alabama and his Bachelors in Mechanical Engineering from Zhejian University. Prior to joining Winchester he held roles with both Motorola Inc. and Panasonic. He specializes in Cable & Wire Harness Design and Assembly, RF Connector Design & Cable Assemblies and is a Six Sigma Green Belt. As a fun fact, Larry played tennis competitively in college and almost became a tennis coach.

  • Marc Raby

    Multi-Pin Design Engineer - WKC

    • Multi-Pin

    Marc Raby

    Multi-Pin Design Engineer - WKC

    Marc started his career in the industry when he joined Winchester in 2012. He earned his Bachelor of Science in Mechanical Engineering from the University of Connecticut and specializes in Combination D-Sub Connectors, Rack and Panel Connectors, Size 8 RF and Power Contacts, and C-Press PCB Connectors. Marc is passionate about Aerospace and Analysis, and as a fun fact, is a seasoned obstacle race competitor and not only competed at, but completed the 2015 World’s Toughest Mudder, a 24-hour race held in Las Vegas, NV.

  • Michael Davis

    Business Development Director - Tekna Seal

    • Glass Hermetic Sealing

    Michael Davis

    Business Development Director - Tekna Seal

    Mike joined Winchester Electronics in 2016, having been with Winchester acquisition, Tekna Seal, since 2011. He is an American Society for Quality member and has been in the manufacturing industry since 2002. He has a degree from Anoka Technical College for CNC Manufacturing Technology, and gives back to his community by volunteering as a safety advisor for FIRST – a robotics competition for high school students. As a fun fact, Mike is working on his pilot’s license so that he can speed and not have to worry about stoplights.

    Mike Davis
  • Richard Grape

    Sr. Application Engineer - Franklin

    • Complex Wire Harness
    • Heavy Gauge Power Cables and Cords
    • Multi-Conductor
    • Overmold Cable Assemblies

    Richard Grape

    Sr. Application Engineer - Franklin

    Richard has been with Winchester since 2013, and has 16 years of industry experience. Prior to joining Winchester, he was a Sr. Product Development Engineer with TE Connectivity. He specializes in Copper Cable Development and Harness Design. He is passionate about doing the best job he can in all aspects of life, and enjoys skiing, kayaking, and backpacking outside of work.

  • Tony Martiniello

    General Manager - TRU Corporation

    • RF & Microwave
    • RF and Microwave Coaxial Cables
    • Semi Rigid

    Tony Martiniello

    General Manager - TRU Corporation

    Tony has been with Winchester since 2014 and has over 33 years of industry experience. Prior to joining Winchester, he held roles as Design/Test Engineer at Alford Manufacturing, Engineer Manager at Adams Russell, Product Line Manager at AMP/Tyco Electronics, and Director of Business Development, Engineering, and Q&A at TRU Corporation. Tony specializes in RF Coaxial Cable, design and testing of Connectors & Cable Assemblies, and design and testing of Waveguide to Coax Adapters. He is a member of IEEE, Association of Old Crows, and ECA CE-4,0 RF Connector Committee. He is the owner of two patents and the author of many white papers, including The Delay that Speeds Time to Market – Wireless Design & Development July 1999 edition, and Design Techniques for High Power RF Coaxial Cable Assemblies –  IMS 2012 – Richardson RFPD. He gives back to his community by being a youth sports volunteer and, as a fun fact, he’s been inside B52, B-1 and B-2 Bombers.

  • Troy Coverstone

    Applications Engineer - TRU Corporation

    • RF & Microwave
    • RF Cable Assemblies
    • Microwave Absorber Material

    Troy Coverstone

    Applications Engineer - TRU Corporation

    Troy has been with Winchester since 2014 and has 6 years of industry experience. He has prior experience as a Design Engineer at Amphenol RF, and earned his Bachelor of Science from Worcester Polytechnic Institute. He specializes in High Power and Performance RF and Microwave Interconnects, and Microwave Absorber Material. He gives back to the community by volunteering at food pantries and teaching K-12 students about alternative energy. A fun fact about Troy is he is the co-owner of a startup Hop yard.

  • Yianni Antoniades

    Senior Electrical Engineer - WKC

    • RF & Microwave

    Yianni Antoniades

    Senior Electrical Engineer - WKC

    Yianni has been with Winchester Electronics since 2007 and has 14 years of industry experience. He earned his Bachelor of Science in Electrical Engineering from the University of Akron and his Master of Science in Electrical Engineering from Virginia Tech. Yianni has previously held roles at Ansoft and Northrop Grumman Interconnect Technologies. He specializes in High Performance RF and Microwave Interconnects, Antennas, High Speed Digital Signal and Power Integrity, and PCB design and optimization. He is a member of IEEE, SMPTE,  Designcon (technical program committee), and DLA SMP/SMPM specification committee. Yianni enjoys spending time with family and his hobbies include sports, music, reading, and technology.

Nothing Found